-
Matt (Admin) commented on the post, Success! New packrafts tested. 5 years, 5 months ago
Hi Joe, yeah, I’ll likely do a regular version of a similar design – not sure when I’ll be able to get to it. It’s good to know people are interested though!
-
Matt (Admin) replied to the topic 2 Chamber modification in the forum DIY Packrafts 5 years, 5 months ago
Hi David,
I think it’s worth trying – it’s one of those things I’ve been meaning to try for ages but haven’t got around to, myself. What I’m not sure about is the longevity of a glued joint on the inside of the tube fabric, and what’s the best adhesive to use. Some people have reported that a glue called HH-66 works well, but I can’t find it…[Read more]
-
Matt (Admin) replied to the topic How airtight are your boats? in the forum DIY Packrafts 5 years, 5 months ago
Hi Markus,
It sounds like the air is escaping through the zipper – a few small bubbles could add up to 1-2 breaths per hour, no? This could probably be resolved by cleaning the zipper and reapplying lubricant. If the zipper isn’t leaking and the seams are all sealed and the fabric isn’t damaged and there’s no dirt in the Boston valve or top-up…[Read more]
-
Matt (Admin) replied to the topic bowl for curved surface in the forum DIY Packrafts 5 years, 6 months ago
Done!
-
Matt (Admin) commented on the post, Surprise: Another New DIY Packraft Model 5 years, 6 months ago
I see you found it 😀
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 5 years, 6 months ago
Hahaha!
Good looking fish!
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 5 years, 6 months ago
Gorgeous shot!
-
Matt (Admin) commented on the post, The Silicone Roller: my new favorite tool 5 years, 6 months ago
See the link in the first comment above.
-
Matt (Admin) commented on the post, Surprise: Another New DIY Packraft Model 5 years, 6 months ago
Yeah, I’ll probably make a video of the new packrafts after I finish all the instructions.
-
Matt (Admin) commented on the post, The Silicone Roller: my new favorite tool 5 years, 6 months ago
I’ve played with it a bit, but not to the point where I’m comfortable using it. I think the keys are to apply heat equally and evenly to both pieces of fabric and to not overheat them, and I find all of those things challenging.
-
Matt (Admin) commented on the post, Surprise: Another New DIY Packraft Model 5 years, 6 months ago
I haven’t designed one yet, but it’s certainly possible!
-
Matt (Admin) commented on the post, Surprise: Another New DIY Packraft Model 5 years, 6 months ago
I don’t foresee any issues with the seat back interfering with a spray deck – just place the cockpit coaming back far enough so the seat back doesn’t push against it. Thigh straps shouldn’t be a problem either. If you don’t like the seat you can cut off the seat back and just make a flat seat instead and add a back band or something else (or just…[Read more]
-
Matt (Admin) replied to the topic Modify Therma-Rest pad for an inflatable floor. in the forum DIY Packrafts 5 years, 6 months ago
Great idea, Bruce! It’s amazing you were able to remove the foam and reseal where it had been. Thanks for sharing!
-
Matt (Admin) commented on the post, Surprise: Another New DIY Packraft Model 5 years, 6 months ago
Hi Christian, thanks for your interest! It depends on the type of paddling you want to do, but if weight isn’t your main concern, personally I would choose the new model. Aside from the design updates, the instructions will be easier to follow. It’ll be in the shop quite soon. Cheers!
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 5 years, 6 months ago
Beautiful!
-
Matt (Admin) commented on the post, Surprise: Another New DIY Packraft Model 5 years, 7 months ago
No, there’s nothing about the V3 design that precludes a wrap-around bottom, but I don’t intend to offer it as an option.
-
Matt (Admin) commented on the post, Surprise: Another New DIY Packraft Model 5 years, 7 months ago
Yep, you’re right – it’s got a higher volume bow and stern.
-
Matt (Admin) replied to the topic Long Top Off Tubes in the forum DIY Packrafts 5 years, 7 months ago
Yep, you just have to cut the black tube and insert some flexible tubing (or rigid tubing pieces that you can then attach flexible tubing to). You can get clear PVC tubing at most hardware stores, and that should work well enough for float bags. Cheers!
-
Matt (Admin) replied to the topic TPU heat damage and repair? in the forum DIY Packrafts 5 years, 7 months ago
Yes, I’ll help you out if that’s what you prefer – just send me a message through the Contact form.
-
Matt (Admin) commented on the post, Success! New packrafts tested. 5 years, 7 months ago
I haven’t calculated it yet, but it should be comparable to the V3 plus a bit for some extra things that will be included that the V3 kit doesn’t have.
- Load More
