[bill]

Bought another tube of Aquaseal last night and patched a few more leaks at the joints. Still had a small leak somewhere… may end up installing a zipper next to help me finally seal this boat.

Also just put together a seat, simply folded the extra floor material in half and used the extra strip material as pseudo baffles – one popped off immediately when first inflated, so I’ll either use longer strips of fabric or iron more of the strip to the seat next time. Seats seem easy!

Hoping it will float soon!

 

• This reply was modified 7 years, 1 month ago by bill.

[bill]

Well, I’ve got it most of the way together. I definitely forgot some steps, like folding little tabs at the joints, and have had to make up for it with a lot of aquaseal. Also had several seams not come together just right, so plenty of wrinkles at a few spots.

But wow! It’s really looking like a boat now, and it’s so small!

Still patching some leaks at the joints, and debating a second layer to the floor. May try to add a second layer with a valve so that I can blow up the floor… not sure how that will work.

Hope to be on the water soon!

bill

[Author]

Replies