[PeteH]

Hi Matt,

I am now partway through my project. Have attached 3R and 3L all is going well but the fabric extends beyond dot by 1cm or so ( I chose to align with split at stern in preference?). Now about to attach 2R and 2L but on this occasion thinking to align with slit at Bow leaving excess material on 2L where it joins 3L. 1. Am I correct to assume 2L will need to be trimmed? And 2. Assuming 1 is correct should 2L be aligned with slit or 3L

I have added (via edit) photos to this post elsewhere but they have been lost in the forum somewhere….?

 

 

[PeteH]

Proposed trim in yellow

• This reply was modified 4 years, 10 months ago by PeteH.

[PeteH]

Thanks Matt, i trimmed as suggested (photo attached) which has worked well, thanks

[Author]

Replies