-
Matt (Admin) replied to the topic New seat design in the forum DIY Packrafts 7 years ago
Hi Lyn,
The manufacturer doesn’t indicate a pressure rating so I can’t guarantee anything, but I’ve tested them up to about 5 psi (350 hPa) myself and they showed no signs of stress.
For reference, a 170 lb (77 kg) weight distributed over an area of 12 x 18″ (30 x 45 cm) on an inflatable seat exerts about 0.8 psi (55 hPa) – quite a large safety factor.
-
Matt (Admin) replied to the topic An Inflatable Drybag that fits through your zipper. in the forum DIY Packrafts 7 years ago
Great idea, Bruce! It looks durable and very easy to pack. Using a wooden form to seal the circular ends is a great idea, too – it’s a useful tip for anyone who wants to create round drybags of any type. Thanks for posting!
-
Matt (Admin) wrote a new post 7 years ago
Bruce C., a frequent contributor to the DIY Packraft forum and host of the popular DIY Packraft-making classes at the Folk School in Fairbanks, Alaska, has just finished this beautiful Voyageur 2-person DIY […]
-
The thing along the side of the packraft looks like adjustable points for tie downs? Is that correct and if so any idea how they were done?
-
That’s correct – I believe they’re made out of the 1000D and 210D fabric with holes punched through, and they were heat sealed to the tube from the inside, before putting the packraft together. Cheers!
-
-
Hi Kent, the construction method is the same as for the single V3 kits, so there’s not really any difference in difficulty – the seams are longer though so it might take a bit more time. Cheers!
-
Excellent!
-
-
Matt (Admin) wrote a new post 7 years ago
Recently I realized that a fast-curing adhesive was missing from my field repair kit, and that if something goes wrong on a packrafting trip and field repair tape won’t do the job, I might have to sit around for […]
-
As this seems to be an older posts and Aquaseal UV doesn’t appear in the shop anymore, are you able to confirm whether this is still the quickest curing glue you’d recommend for a field repair kit?
-
Yep, I still recommend it. I’ve stopped selling adhesives because they’re not supposed to go through the mail and they’re not allowed into some countries.
-
-
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 7 years ago
It looks fantastic! Thanks for posting, Bruce!
-
Matt (Admin) wrote a new post 7 years ago
A couple of people in Australia and New Zealand have used freight forwarders to reduce shipping costs when ordering DIY Packraft kits, and I thought I should tell the rest of you about this potential cost-saving […]
-
It cost me about $80USD total to get it to Tasmania via a US freight forwarder.
When I first ordered the site was quoting me $140 AUD postage which is a bit of a deal breaker.
I notice now its only quoting about $100AUD.
So I probably wouldn’t have bothered with the forwarder now.However the postage times from the forwarder are generally fast.
They often have special rates for DHL, FedEx, UPS etc. So it ends up taking 2-4 Days from Los Angeles to Tasmania.-
Thanks for the feedback, Aaron. I’ve been refining the estimated weights used to calculate the shipping costs of the different kit variations so they’re closer to the actual weights, and that’s probably why the shipping price has changed. Smaller kits with lighter floor material and/or no extras can weigh under 3 kg, which is one of those thresholds where the price jumps up on overseas shipments. Thanks!
-
-
Hi Eleonora, unfortunately I don’t have an answer for you and I doubt you will receive one here anytime soon because I have only a few customers in Italy and I don’t recall any of them having used a freight forwarder. You might be able to find more information elsewhere online – if so, please tell us here. Also, sometimes the direct route is the most cost-effective even if it isn’t cheap. Thanks!
-
-
Matt (Admin) replied to the topic bikerafting advice in the forum DIY Packrafts 7 years ago
Hi Matteo – welcome to the forum!
All of the DIY Packrafts are capable of carrying over 100 kg. I probably wouldn’t use an Ultralight packraft for bikerafting though, as the ultralight fabric is more fragile, but you could do so if you were more careful.
Each DIY Packraft kit comes will scrap fabric to make attachment points and grab loops, and…[Read more]
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 7 years ago
Beauty!!
-
Matt (Admin) replied to the topic Alternative sources for fabric and other materials in the forum DIY Packrafts 7 years ago
Hi Mike,
Most of the fabrics available are only coated on one side, except for the heavier fabrics in the DIY Packraft shop, and possibly some sold elsewhere. I used to have fabrics with PU coating on the other side from the TPU, but PU is not as good as TPU. You will find that most PU coatings are not airtight or waterproof and can rub off with…[Read more]
-
Matt (Admin) wrote a new post 7 years, 1 month ago
This is just a quick post to let you know that the V3 DIY Packraft Deluxe (single) kits are now shipping.
I’m currently fulfilling the pre-orders, some of which were placed as far back as August, so please be […]
-
Matt (Admin) wrote a new post 7 years, 1 month ago
For trip planning, it’s important to be able to estimate how much water you can cover in a given amount of time. You need to consider wind and current speeds, of course, (especially if you’re paddling in a river […]
-
Anyone have any data on the speed of a 2 person packraft?
-
The 2-Person model is constructed like the Skeena and the seat can be placed in the middle, but it is slower and more awkward to paddle because it is much longer and wider.
-
-
Matt (Admin) and
Raimondas are now friends 7 years, 1 month ago -
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 7 years, 1 month ago
Awesome!! Thanks for posting, Jeremy!
-
Matt (Admin) wrote a new post 7 years, 1 month ago
Today I’m leaving town for a couple of weeks, but the new V3 DIY Packraft is pretty much ready to go, so kits will start shipping after I return on September 30th.
The new V3 packraft instructions are posted […]
-
Hi Katie – for now the V3 is only available as a kit. I may offer plans at some point in the future, but probably not as I’ve had issues with people buying a set of plans and then trying to use them to make money. Thanks for your interest!
-
-
Matt (Admin) replied to the topic Ultralight DIY Packraft in the forum DIY Packrafts 7 years, 1 month ago
Cool! Thanks for posting 😀
-
Matt (Admin) replied to the topic Heat-sealing tools in the forum DIY Packrafts 7 years, 2 months ago
Thanks for your review, Bruce!
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 7 years, 2 months ago
Great shot! I love seeing DIY Packrafts in what to me are exotic locations!
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 7 years, 2 months ago
That’s a big rubber duck 😀 Looks great!
-
Matt (Admin) wrote a new post 7 years, 2 months ago
Tom F. sent me this video and this link to a forum thread documenting the design and construction of a lightweight fishing float tube (a.k.a. bellyboat or belly boat) using heat sealable fabrics. […]
-
Matt: AWESOME link to this man’s quest to build a 2 lb float tube. I read through all 22 pages of posts spanning 5 years of research and design. Fascinating stuff. We lost a good one when he died.
-
-
Matt (Admin) wrote a new post 7 years, 2 months ago
Nikki’s parents were visiting over the holiday weekend and they wanted to try out the new packraft, so I took the opportunity to take a few pictures to share. You can see that the weather was much better than the […]
- Load More
