Tomi

Hi Fred, this is great – thanks for posting! There’s lots to learn from here and I’d like to move it to a dedicated “build report” page so more people will see it. If you’re up for it, I might ask you for some more pictures to illustrate the text.

Cheers!

Hi Damo, the only suppliers I’m aware of are ExtrimTextil in Germany, Seattle Fabrics in the US, and Aliexpress in China. I didn’t like the fabrics from Seattle Fabrics (melting point of fabric too similar to melting point of coating), and the reviews of the fabrics on Aliexpress are pretty bad (the coatings easily delaminate). In your case the…[Read more]

Excellent work, Damo! I look forward to your feedback. Thanks for posting!

Cool – I’ll be interested to know how it works out. I’m sure lots of other people experience the same thing and I wonder if what works for my paddle works for others. Cheers

I use a 240 cm paddle and it does drip a fair amount if I leave the blades unfeathered (blades at the same angle), so I don’t think a longer paddle is necessarily the solution, but it could help. I feather my paddle to 30 or 60 degrees so the top blade is flatter when the low blade is vertical in the water, and then water doesn’t run off the top…[Read more]

Wow, beautiful – thanks for sharing!

Yikes, that could have ended badly!

I’m not aware of any time limitations for the irons – I have left my irons plugged in for much longer than two hours without any sign of problems, and I haven’t heard of anyone else having this problem either, so I think maybe you were unlucky and received a bad iron. It’s unfortunate that it takes so long to…[Read more]

Haha, that’s great! This project really does appeal to a certain type of person – there’s surely another type that ends up shelving it unfinished, but those people don’t tell me about it so it’s hard to know how many there are. It is pretty gratifying to see the “repeat offenders” though!

I think you’re right that the Anfibio self-bailing tube…[Read more]

Excellent! 😀

Awesome! Thanks for the feedback!

If tube 1 fits nicely between tube 2 and the center slit then I would locate the tubes as you have them in the pictures without modifying anything, but if tube 1 doesn’t fit, then I would trim the corner in this picture to make tube 1 fit.

It looks like it extends about 5 mm past the slit, so I would trim off 5 mm at the corner and gradually…[Read more]

Hi Tuk,

Apologies for the slow reply – for some reason the notification for this post went to my spam folder and I just saw it now.

A 1 cm difference isn’t a big deal (it’s about 1% of the overall length of the seam) and it won’t make a noticeable difference in the finished packraft, but how to accommodate it depends a bit on the adjacent tubes…[Read more]

Very cool 🙂

That is a great idea – I will try it myself!

Beautiful! How did you make the logos? They look great!