-
Matt (Admin) replied to the topic Seam strip start in the forum DIY Packrafts 6 years, 9 months ago
Hi Naas, I can’t see any reason why that wouldn’t work, so if you give it a go please let us know how you like it compared to the regular method.
Cheers!
-
Matt (Admin) replied to the topic Pure TPU as adhesive in the forum DIY Packrafts 6 years, 9 months ago
Hi Naas, I tried using TPU tape and couldn’t get it to form a strong bond with the fabric so I gave up on the idea, but if you figure out a method that works, please let us know!
-
Matt (Admin) replied to the topic Seat Tie-in tabs in the forum DIY Packrafts 6 years, 9 months ago
Another excellent idea out of Fairbanks! Thanks, Bruce, and keep ’em coming!
I’ll add this to the how-to page so more people will see it.
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 6 years, 9 months ago
Beauty!
-
Matt (Admin) wrote a new post 6 years, 9 months ago
This is just a quick post to let you know that the 210D camouflage fabric is now in stock, so that means there’s nothing left on backorder. Now it’s just a matter of catching up on the orders that were placed on […]
-
Glad to hear! Don’t work too hard though, remember to breathe! By the way, is there any chance that you could get CADPAT (Canadian digital pattern) camouflage fabric material?
-
Thanks!
Unfortunately I won’t be able to offer different patterns in the foreseeable future.
-
-
-
Matt (Admin) wrote a new post 6 years, 9 months ago
This is just an FYI that I’m making some improvements to the DIY Packraft website behind the scenes, with the goal of making the various pages load faster for you. In theory, this should only improve your browsing […]
-
The site definitely seems faster to me. So far so good.
-
We can’t properly login to the forum…
I managed to post in the “say hi” thread, but thats about it.
website is constantly telling us: “You must be logged in to create new topics.”
We tried multiple browsers…-
Thanks for telling me! I think I have fixed the problem – please check.
-
-
yes, it works now. thanks
-
-
Matt (Admin) replied to the topic Multi-person Voyageur Size in the forum DIY Packrafts 6 years, 9 months ago
Excellent – sounds good!
One thing to note is that the higher up the center of gravity is, the less stable the boat will be and the lower the sides will seem. It should still be really stable (because it’s so wide), but just be careful with the little ones 🙂
-
Matt (Admin) wrote a new post 6 years, 10 months ago
I borrowed this book from my local library and I liked it quite a bit, so I thought I’d post a review here in case you’re looking for a paddling book. I might make book reviews an occasional feature of the blog, […]
-
Matt (Admin) wrote a new post 6 years, 10 months ago
I’ve added a quick video to the inflation bag instructions page. If it helps you, please “like” it on Youtube 🙂
-
It’s TPU coated ripstop nylon: https://www.diypackraft.com/faq/fabrics/
-
-
Matt (Admin) wrote a new post 6 years, 10 months ago
I made a quick video of me making an inflatable seat from a seat kit, to go along with the text+picture instructions. It’s not the current seat with dedicated tie-down points, but the shape and number of baffles […]
-
I haven’t experienced this, but I’m curious if you added reinforcing strips to the TPU side of the baffle-to-seat welds – I’ve always done that, but I can see how it might peel over time if you didn’t. I’m also curious if it’s happening at the ends of the baffles (close to the side of the seat) or somewhere in the middle. When you make your inflatable floor, I recommend extending the baffles fairly close to the edge of the floor so there’s no tension on the edge of the baffles when the floor is inflated… if that doesn’t make sense, send me an email and I’ll draw a picture. One other tip is to avoid over-inflating the seat… it’s more comfortable and there’s much less tension on the welds when it’s a bit soft. Cheers!
-
Thanks, Reed. Please let me know if it gets worse.
The 190 GSM fabric might be okay, but its tear strength is a lot lower than that of the 250 GSM fabric, so it probably depends on how you’ll use it. I haven’t tried it myself, so I can’t really advise you on that.
-
-
Matt (Admin) wrote a new post 6 years, 10 months ago
I noticed the FAQ menu was getting a bit long, so I’ve reorganized it to (hopefully) make it easier to navigate. I’m also adding some more content, such as this page I wrote about directional stability, or why […]
-
Matt (Admin) wrote a new post 6 years, 10 months ago
The airtight zippers and green fabric have arrived! Camouflage fabric should be here in about a week.
There’s a bit of a backlog of orders that were waiting for the zippers – I’ll do my best to get them shipped […]
-
Matt (Admin) replied to the topic Multi-person Voyageur Size in the forum DIY Packrafts 6 years, 10 months ago
Hi Thomas – you would need 2m (~6′) of tube fabric to make the two tubes 3′ longer, plus 1 m of floor material. Cheers
-
Matt (Admin) replied to the topic Multi-person Voyageur Size in the forum DIY Packrafts 6 years, 10 months ago
Hi Joe, I’m sorry to say I don’t have much useful experience when it comes to taking on smaller passengers, so I can’t really say how much room they’ll need. My experience has been that you can cram a lot of people or gear into a small area fairly easily, but the amount of time it remains comfortable depends on how much room everyone has to shift…[Read more]
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 6 years, 10 months ago
Nice! I’m glad to see you looking so happy!!
-
Matt (Admin) replied to the topic Inaugural V3 trip in the forum DIY Packrafts 6 years, 10 months ago
Nice! Thanks for posting!
-
Matt (Admin) replied to the topic Finished my V3! in the forum DIY Packrafts 6 years, 10 months ago
Thanks! I’ve added some of your pictures to the How-To page for tie-downs and attachment points 🙂
-
Matt (Admin) replied to the topic Necessity of the Top-Up-Valve? in the forum DIY Packrafts 6 years, 10 months ago
I second Mark’s opinion. It’s safe to open the top cover of the Boston valve on the water because of the one-way valve inside, and you can top up through that. Bruce from Fairbanks carries a ~1 meter length of 7/8″ OD silicone tubing to plug into the Boston valve so he doesn’t have to twist around to get his mouth on it, which is a good idea. I…[Read more]
-
Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 6 years, 10 months ago
Excellent! Thanks for the update 🙂
-
Matt (Admin) replied to the topic Finished my V3! in the forum DIY Packrafts 6 years, 10 months ago
Beauty!! Thanks for the pictures and the tips! Do you mind if I use them elsewhere on the site?
- Load More
